-
Product standards
HG/T 4947-2016
-
Package
Bulk, tank truck transport; It can also be packed in steel drums according to user requirements.
Technical requirement
| Measuring ltems | Limits |
| Appearance | Light yellow to colorless transparent liquid |
| Density（ρ20）/(g/cm3) | 1.090 0~1.120 0 |
| Chrominance/APHA | 50 |
| Purity，w/% | 85.0 |
| Acid value (in KOH)/(mg/g) | 0.30 |
| Refractive index（20℃） | 1.472~1.476 |
| Water，w/% | 0.10 |
| Viscosity(25°C) / (mPa· s) | 70~110 |
| Retarder (MEHQ)/ (ug/g) | 100~400 |
| Methylbenzene，w/% | 0.20 |
| Other organic solvents，w/ % | 0.50 |
Use to
As a chemical and radiation assisted crosslinking agent for polymers, it is suitable for the processing and modification of synthetic rubber, polyolefin, polyester resin, etc., and can also be used as monomers, adhesives and organic synthesis raw materials for the preparation of polymers.
Vulcanizing aid
When vulcanized with peroxide or used for synthetic rubber, it can improve corrosion resistance, aging resistance, hardness and heat resistance, and can absorb the odor generated when vulcanized with peroxide (such as DCP, 2,5-Dimethyl-2,5-di(tert-butylperoxy)hexane, etc.). It has a plasticizing effect during mixing and a hardening effect after vulcanization, and can be used for MBR, EPDM, acrylic rubber and neoprene rubber.
Crosslinking agent
It can reduce radiation dose, shorten radiation time and improve cross-linking density. It is characterized by low viscosity, high cross-linking degree, low steam pressure and fast curing speed (especially suitable for PVC and PE radiation cross-linking processes); in addition, it can be used for photocurable inks and photopolymerized materials.
Wire coating material
It can be used as the wire coating material - crosslinking agent for PVC resin that a tough coat with heat resistance is formed by coating a very thin layer on the thin wire core.